Skip to content ↓

A molecular approach to solar power

Switchable material could harness the power of the sun — even when it’s not shining.
Press Inquiries

Press Contact:

Andrew Carleen
Phone: 617-253-1682
MIT News Office

Media Download

A powerful arc lamp is used to simulate sunlight on a sample of photoswitchable molecules, driving structural changes at the molecular level. A portion of the light's energy is stored with each structural change. The progress of these changes can be tracked by monitoring the molecules' optical properties.
Download Image
Caption: A powerful arc lamp is used to simulate sunlight on a sample of photoswitchable molecules, driving structural changes at the molecular level. A portion of the light's energy is stored with each structural change. The progress of these changes can be tracked by monitoring the molecules' optical properties.
Credits: Image courtesy of the researchers
The working cycle of a solar thermal fuel is depicted in this illustration, using azobenzene as an example. When such a photoswitchable molecule absorbs a photon of light, it undergoes a structural rearrangement, capturing a portion of the photon's energy as the energy difference between the two structural states. When the molecule is triggered to switch back to the lower-energy form, it releases ...
Download Image
Caption: The working cycle of a solar thermal fuel is depicted in this illustration, using azobenzene as an example. When such a photoswitchable molecule absorbs a photon of light, it undergoes a structural rearrangement, capturing a portion of the photon's energy as the energy difference between the two structural states. When the molecule is triggered to switch back to the lower-energy form, it releases that energy difference as heat.
Credits: Illustration courtesy of the researchers

*Terms of Use:

Images for download on the MIT News office website are made available to non-commercial entities, press and the general public under a Creative Commons Attribution Non-Commercial No Derivatives license. You may not alter the images provided, other than to crop them to size. A credit line must be used when reproducing images; if one is not provided below, credit the images to "MIT."

Close
A powerful arc lamp is used to simulate sunlight on a sample of photoswitchable molecules, driving structural changes at the molecular level. A portion of the light's energy is stored with each structural change. The progress of these changes can be tracked by monitoring the molecules' optical properties.   
Caption:
A powerful arc lamp is used to simulate sunlight on a sample of photoswitchable molecules, driving structural changes at the molecular level. A portion of the light's energy is stored with each structural change. The progress of these changes can be tracked by monitoring the molecules' optical properties.   
Credits:
Image courtesy of the researchers
The working cycle of a solar thermal fuel is depicted in this illustration, using azobenzene as an example. When such a photoswitchable molecule absorbs a photon of light, it undergoes a structural rearrangement, capturing a portion of the photon's energy as the energy difference between the two structural states. When the molecule is triggered to switch back to the lower-energy form, it release...
Caption:
The working cycle of a solar thermal fuel is depicted in this illustration, using azobenzene as an example. When such a photoswitchable molecule absorbs a photon of light, it undergoes a structural rearrangement, capturing a portion of the photon's energy as the energy difference between the two structural states. When the molecule is triggered to switch back to the lower-energy form, it releases that energy difference as heat.
Credits:
Illustration courtesy of the researchers

It’s an obvious truism, but one that may soon be outdated: The problem with solar power is that sometimes the sun doesn’t shine.

Now a team at MIT and Harvard University has come up with an ingenious workaround — a material that can absorb the sun’s heat and store that energy in chemical form, ready to be released again on demand.

This solution is no solar-energy panacea: While it could produce electricity, it would be inefficient at doing so. But for applications where heat is the desired output — whether for heating buildings, cooking, or powering heat-based industrial processes — this could provide an opportunity for the expansion of solar power into new realms.

“It could change the game, since it makes the sun’s energy, in the form of heat, storable and distributable,” says Jeffrey Grossman, an associate professor of materials science and engineering, who is a co-author of a paper describing the new process in the journal Nature Chemistry. Timothy Kucharski, a postdoc at MIT and Harvard, is the paper’s lead author.

The principle is simple: Some molecules, known as photoswitches, can assume either of two different shapes, as if they had a hinge in the middle. Exposing them to sunlight causes them to absorb energy and jump from one configuration to the other, which is then stable for long periods of time.

But these photoswitches can be triggered to return to the other configuration by applying a small jolt of heat, light, or electricity — and when they relax, they give off heat. In effect, they behave as rechargeable thermal batteries: taking in energy from the sun, storing it indefinitely, and then releasing it on demand.

The new work is a follow-up to research by Grossman and his team three years ago, based on computer analysis. But translating that theoretical work into a practical material proved daunting: In order to reach the desired energy density — the amount of energy that can be stored in a given weight or volume of material — it is necessary to pack the molecules very close together, which proved to be more difficult than anticipated.

Grossman’s team tried attaching the molecules to carbon nanotubes (CNTs), but “it’s incredibly hard to get these molecules packed onto a CNT in that kind of close packing,” Kucharski says. But then they found a big surprise: Even though the best they could achieve was a packing density less than half of what their computer simulations showed they would need, the material nevertheless seemed to deliver the heat storage they were aiming for. Seeing a heat flow much greater than expected for the lower energy density prompted further investigation, Kucharski says.

After additional analysis, they realized that the photoswitching molecules, called azobenzene, protrude from the sides of the CNTs like the teeth of a comb. While the individual teeth were, indeed, twice as far apart as the researchers had hoped for, they were interleaved with azobenzene molecules attached to adjacent CNTs. The net result: The molecules were actually much closer to each other than expected.

The interactions between azobenzene molecules on neighboring CNTs make the material work, Kucharski says. While previous modeling showed that the packing of azobenzenes on the same CNT would provide only a 30 percent increase in energy storage, the experiments observed a 200 percent increase. New simulations confirmed that the effects of the packing between neighboring CNTs, as opposed to on a single CNT, explain the significantly larger enhancements.

This realization, Grossman says, opens up a wide range of possible materials for optimizing heat storage. Instead of searching for specific photoswitching molecules, the researchers can now explore various combinations of molecules and substrates. “Now we’re looking at whole new classes of solar thermal materials where you can enhance this interactivity,” he says.

Grossman says there are many applications where heat, not electricity, might be the desired outcome of solar power. For example, in large parts of the world the primary cooking fuel is wood or dung — which produces unhealthy indoor air pollution, and can contribute to deforestation. Solar cooking could alleviate that — and since people often cook while the sun isn’t out, being able to store heat for later use could be a big benefit.

Unlike fuels that are burned, this system uses material that can be continually reused. It produces no emissions and nothing gets consumed, Grossman says.

While further exploration of materials and manufacturing methods will be needed to create a practical system for production, Kucharski says, a commercial system is now “a big step closer.”

The adoption of carbon nanotubes to increase materials’ energy storage density is “clever,”  says Yosuke Kanai, an assistant professor of chemistry at the University of North Carolina who was not involved in this work. He adds that the resulting increase in energy storage density “is surprising and remarkable.”

“This result provides additional motivation for researchers to design more and better photochromic compounds and composite materials that optimize the storage of solar energy in chemical bonds,” Kanai says.

The team also included MIT research scientist Nicola Ferralis, assistant professor of mechanical engineering Alexie Kolpak, and undergraduate Jennie Zheng, as well as Harvard professor Daniel Nocera. The work was supported by BP though the MIT Energy Initiative and the U.S. Department of Energy’s Advanced Research Projects Agency – Energy.

Press Mentions

Forbes

Writing for Forbes, Neil Kane writes about new technology developed by MIT researchers that allows for solar energy to be captured when the sun is shining and stored for later use.

The Atlantic

Atlantic reporter Todd Woody writes about how MIT researchers have developed a way to store solar energy in molecules. The energy inside the molecules can be stored forever and endlessly re-used so that solar power can be accessed even when the sun is not shining, Woody explains. 

Boston.com

Boston.com reporter Matt Rocheleau reports on how Professor Jeffrey Grossman and postdoctoral associate Timothy Kucharski have developed a new material that can produce solar power for times when the sun is not shining.

Related Links

Related Topics

Related Articles

More MIT News

Group of 10 people posing on the grass in front of the MIT Dome

MeepCon comes to MIT

Photonics community gathers to further develop open-source software for electromagnetic simulations spanning a broad range of applications.

Read full story